Treatment of the Local Construction Gypsum Weak Points by the Addition of ۴% w/w White Portland Cement

سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 15

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJCCE-41-12_030

تاریخ نمایه سازی: 17 خرداد 1404

چکیده مقاله:

The amazing properties of structural gypsum make it a miracle material for finishing construction processes, especially from a health and environmental point of view. Chemically, the binding forces between gypsum molecules are limited to dipole-dipole interactions (hydrogen bonding) rather than fixed conventional bonds. Such relatively weak bonds are responsible for the two common weak points including the water solubility and the relatively low hardness. Therefore, white Portland cement was suggested as an additive for treating those essential disadvantages of construction gypsum.  Samples of different ratios at ۰.۰%, ۰.۵%, ۱.۰%, ۲.۰%, ۳.۰%, ۴.۰%, ۵.۰%, ۶.۰%, and ۸.۰% w/w of white cement to gypsum were made using ۰.۰۷x۰.۰۷x۰.۰۷m and ۰.۰۵x۰.۰۵x۰.۰۵m test cubes. The standard tests of physical and mechanical properties including hardness, compressive strength, setting time, and water resistance were measured. The results indicate that the presence of cement as an additive could eliminate the weak points of construction gypsum without any negative side effects. The study was supported by an aging investigation using thermodynamic and kinetic analyses. In conclusion, it was strongly recommended to exploit white cement as an additive at a ratio of ۴% w/w or ۴.۵% v/v to improve the physical properties of building gypsum. It was found that the presence of white cement at the optimum ratio of ۴.۰% w/w is not limited to eliminating the weak points of gypsum including the relatively low hardness and water solubility, but it extends to supporting other important properties including both compressive strength and setting time. The suggested additive has many desirable characteristics such as availability, healthy, economical, odorless, no coloring, used in few ratios, easy to deal with, and no volatile organic compounds (VOCs). The presented success can be applied by the construction industry to produce improved gypsum with no weak points.

نویسندگان

Rabah Khalil

Department of Chemistry, College of Science, University of Mosul, Mosul, IRAQ

Mohammed Al-Rasheed

Department of Chemistry, College of Science, University of Mosul, Mosul, IRAQ

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Guelberth C.R., Chiras D., “The Natural Plaster Book: Earth, Lime ...
  • Yu Q.L., Brouwers H.J.H., Design of a Novel Photocatalytic Gypsum ...
  • Karni J., Karni E., Gypsum in Construction: Origin and Properties, ...
  • Lewry A.J., Williamson J., The Setting of Gypsum Plaster, J. ...
  • Singh M., Garg M., Retarding Action of Various Chemicals on ...
  • Khalil A.A., Tawfik A., Hegazy A.A., El-Shahat M.F., Effect of ...
  • Abbood A.A., Atshan A.F., AL-Ridha A.S.D., Improvement of Local Gypsum ...
  • AL-Ridha A.S.D., Abbood A.A., Atshan A.F., Hussein H.H., Dheyab L.S., ...
  • Wang Y., Tian Y., Wang J., Effects of Carbide Slag ...
  • Camarini G., Pento M.C.C., de Moura A.G., Manzo N.R., Effect ...
  • Sakthieswaran N., Sophia M., Effect of Superplasticizers on the Properties ...
  • Murat M., Attari A., Modification of Some Physical Properties of ...
  • Zolotarev A.A., Lushin A.I., Charykov N.A., Semenov, V.I. Namazbaev K.N., ...
  • Peng J., Qu J., Zhang J., Chen M., Wan T., ...
  • Bicer A., Kar F., Thermal and Mechanical Properties of Gypsum ...
  • Bouzit S., Merli F., Sonebi M., Buratti C., Taha M., ...
  • Merino M.dR., Sáez P.V., Iolanda Longobardi I., Astorqui J.S.C., Porras-Amores ...
  • Borreguero A.M., Serrano A., Garrido I., Rodríguez J.F., Carmona M, ...
  • Jeong S-G., Wi S., Chang S.J., Lee J., Kim S., ...
  • Kang Y., Seong S.J., Kim S., Hygrothermal Behavior Evaluation of ...
  • Aquilano D., Otálora F., Pastero L., García-Ruiz J.M., Three Study ...
  • Adams H., Bailey N.A., Fenton D.E., Khalil R.A., Cis- and ...
  • Moresova K., Skvara F., White Cement Properties, Manufacture, Prospects, Ceramics-Silikáty, ...
  • Dunuweera S.P., Rajapakse R,M.G., Cement Types, Composition, Uses and Advantages ...
  • Iraqi Standard “(Materials Specification & Construction Works)”, Chapter ۱: Gypsum ...
  • ASTM C۴۷۲ “Standard Test Methods for Physical Testing of Gypsum ...
  • Kim K., Relation between Hardness and Compressive Strength of Polymer ...
  • Khalil R.A., Saeed A.M.A., The Role of Micellar Catalysis from ...
  • Song X-F., Khalil R.A., Zhang S-H., Zhang K-G., “Effects of ...
  • Khalil R.A., Al-Yosbaky M.A., A Kinetic Method for Prediction the ...
  • Al-Zubaidy M.M.I., Khalil R.A., Kinetic and Prediction Studies of Ascorbic ...
  • Ackerer P., Bouissonnié A., di Chiara Roupert R., Daval D., ...
  • Semiromi A.H., Jahangiri A., Investigation of CO۲ Solubility in Blends ...
  • Khalil R.A., Hammad F.J., Critical Intermolecular Forces: A New Physical ...
  • Azad L.M., Investigation of Thermodynamic Properties of Heavy Metals from ...
  • نمایش کامل مراجع