Improving Open-Pit Mining Efficiency: Economic and Operational Benefits of the Power Deck Method-A Case Study
محل انتشار: مجله معدن و محیط زیست، دوره: 16، شماره: 4
سال انتشار: 1404
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 77
فایل این مقاله در 19 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMAE-16-4_020
تاریخ نمایه سازی: 17 خرداد 1404
چکیده مقاله:
This study introduces an innovative application of the Power Deck method to optimize drilling and blasting operations in open-pit mining, with a focus on the Nizar cement factory in Qom, Iran. Unlike traditional blasting techniques, this method strategically utilizes a controlled air gap at the end of each blast hole to enhance explosive energy distribution, thereby reducing excessive drilling and minimizing explosive consumption. Through five blast phases, optimal hole diameters (۷۶ mm and ۹۰ mm) were implemented while maintaining a standardized ۱-meter air gap, eliminating the need for additional drilling tests. The findings demonstrate a significant improvement in blasting efficiency, leading to a ۱۲.۵% reduction in specific charge and a ۹% decrease in specific drilling compared to conventional methods. Post-blast fragmentation analysis, validated using the F۵۰ index from Split-Desktop software, confirmed particle sizes ranging from ۱۰ to ۳۲ cm, aligning with predictions from the Kaz-Ram, Kaznetsov, and Swedifo models. Furthermore, the adoption of the Power Deck method resulted in a ۱,۴۴۸-ton increase in processed material over two months, minimizing crusher downtime due to oversized fragments. This study provides a novel, cost-effective approach to improving rock fragmentation, reducing blasting-related inefficiencies, and enhancing the overall economic performance of open-pit mining operations.
کلیدواژه ها:
Drilling and blasting optimization ، Power Deck method ، Open-Pit Mining ، Specific charge reduction ، rock fragmentation
نویسندگان
Hadi Fattahi
Faculty of Earth Sciences Engineering, Arak University of Technology, Arak, Iran
Mohammad Amirabadifarahani
Faculty of Earth Sciences Engineering, Arak University of Technology, Arak, Iran
Hossein Ghaedi
Faculty of Earth Sciences Engineering, Arak University of Technology, Arak, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :