Using Tangerine Peel as a Reducing Agent in the Process of Recovering the Cathode Elements from Spent Lithium-Ion Batteries
سال انتشار: 1403
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 33
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJCCE-43-10_009
تاریخ نمایه سازی: 16 خرداد 1404
چکیده مقاله:
This study assessed the potential for recycling the Ni-Co-Mn (NCM) cathode from spent Lithium-Ion Batteries (LIBs) using Tangerine Peel (TP) as a reducing agent in CH۳COOH media. The impact of various parameters, including CH۳COOH concentration (ranging from ۱-۶ M), temperature (ranging from ۳۰-۱۰۰ ºC), leaching time (ranging from ۰.۳۳ to ۷ h), TP/NCM (۰.۱-۲ g/g), was investigated. The results indicated that adding TP improved the recovery of Ni, Co, Mn, and Li. The temperature was the most critical parameter in the reductive leaching process as it facilitated the hydrolysis of TP compounds into glucose. Generally, increasing leaching time, CH۳COOH, and TP concentration improved the recovery. Dissolution of Li was less dependent on reducing agent concentration, while strong dependence was observed for Ni, Co, and Mn elements. Based on parameter optimization results, optimal levels were obtained for time (۶ h), temperature (۱۰۰ °C), CH۳COOH concentration (۳ M), and TP/NCM (۲ g/g). The FT-IR analysis of TP suggests the presence of cellulose, lignin, and hemicellulose bonds in the spectrum. The FT-IR profile of TP hydrolysis in acetic acid reveals the peaks for CH۳COOH and glucose structure. Interestingly, the IR profile of leaching samples in the presence and absence of TP did not display any discernible differences, indicating that glucose molecules produced during leaching were immediately consumed by spent LIBs compounds and did not persist.
کلیدواژه ها:
نویسندگان
Mojtaba Kazazi
Department of Metallurgy and Materials Engineering, Hamedan University of Technology, Hamedan, I.R. IRAN
Saeid Karimi
Department of Metallurgy and Materials Engineering, Hamedan University of Technology, Hamedan, I.R. IRAN
Pedram Ashtari
Department of Mining Engineering, Hamedan University of Technology, Hamedan, I.R. IRAN
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :