spark anodizing of CP-titanium and evaluation of its corrosion resistance
محل انتشار: دومین همایش بین المللی و هفتمین همایش مشترک انجمن مهندسی متالورژی ایران و انجمن علمی ریخته گری ایران
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,246
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES07_329
تاریخ نمایه سازی: 28 آذر 1392
چکیده مقاله:
Titania porous coating was grown by spark anodizing technique in an alkaline electrolyte containing Na3PO4. The processing time was a few minutes and no post- and pre-treatments were required. Spark anodizing is an electrochemical technique for fabrication of anodic film by sparks which move rapidly on the vicinity of surface substrate. This technique is characterized by high productivity, economic efficiency, ecological friendliness, high hardness, good wear resistance, and excellent bonding strength with the substrate. Especial focus of this study was placed on the improvement of the corrosion resistance of titanium in the de-aerated 40 g/L H2SO4 + 40 g/L NaCl solution at 55 °C. Phase composition and surface morphology of the coated sample were evaluated by XRD and SEM respectively. Obtained results show that Titania porous coating contains Anantase. Corrosion behaviour of sample was studied by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods. Applying spark Anodizing technique, the corrosion resistance was enhanced successfully and corrosion rate was decreased dramatically from ~2744 μm/year to ~2.22 μm/year
کلیدواژه ها:
نویسندگان
Hamid Niazi
Iran University of Science and Technologies, Tehran, Iran
Farhad Golestani-Fard
Iran University of Science and Technologies, Tehran, Iran
Mohammad Shahmiri
Iran University of Science and Technologies, Tehran, Iran
Mohammad Reza Bayati
North Carolina State university. Ralleigh, USA