Flexural Behaviour of Precast Lightweight Concrete Sandwich Slabs With Demountable Bolted Steel Shear Connectors

سال انتشار: 1404
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 137

فایل این مقاله در 21 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_CEJ-11-2_006

تاریخ نمایه سازی: 29 اسفند 1403

چکیده مقاله:

A concrete slab is a fundamental element and contributes the highest weight in structural buildings. In this paper, a new type of sandwich slab consisting of two layers of lightweight concrete and demountable steel connectors is proposed in a new attempt to reduce the weight of the floors within the structure and apply a simpler and faster approach to connecting the layers of sandwich panels. The structural effects of the proposed connectors on Precast Lightweight Concrete Sandwich Slab (PLCSS) are evaluated experimentally and theoretically in terms of strength, stiffness, degree of composite action, and usability for floor construction. The behaviors of six PLCSS specimens subjected to four-point loads were investigated, studying the effects of varied parameters such as different numbers, arrangements, and shapes of demountable steel connectors (I, V, and X connector shapes) fastened with steel bolts, in addition to one solid concrete slab as a reference specimen. The panels' performance in this structural system was evaluated by measuring the degree of composite action using load, displacement, stress, and neutral axis methods. Based on the experimental results, the slab panels exhibited composite panel behavior until the point of failure. Under flexural loads, the panel behaved similarly to that of a solid one-way slab; crack patterns appeared in one direction. The specimens with IC, VC, and XC showed different load capacity values, ranging from ۲۲.۷۴ kN to ۵۰.۵۵ kN; these values depend on the types of shear connectors and their numbers in the sandwich panels. Using V and X connectors enhances the composite action between layers, increasing the shear demand and making the shear failure more likely. It can be concluded that demountable shear connectors can transfer shear between the two concrete wythes, resulting in a composite panel with structural integrity, a lighter weight, and satisfying ACI specifications for floor applications. Doi: ۱۰.۲۸۹۹۱/CEJ-۲۰۲۵-۰۱۱-۰۲-۰۶ Full Text: PDF

کلیدواژه ها:

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Einea, A., Salmon, D. C., Fogarasi, G. J., Culp, T. ...
  • Daniel Ronald Joseph, J., Prabakar, J., & Alagusundaramoorthy, P. (2017). ...
  • Alfeehan, A. A., & Sheer, N. M. (2018). Reactive powder ...
  • Alabduljabbar, H., Alyousef, R., & Amran, M. (2019). Applicable use ...
  • Sumadi, S. R., & Ramli, M. (2008). Development of lightweight ...
  • Chen, Y., Kang, C., Wu, Y., & Qian, Z. (2022). ...
  • Lou, X., Xue, W., Bai, H., Li, Y., & Huang, ...
  • Guerrero, N., Carrillo, J., Herrera, R. I., & Marante, M. ...
  • Egbon, B., & Tomlinson, D. (2021). Experimental investigation of longitudinal ...
  • Huang, J., Jiang, Q., Chong, X., Ye, X., & Wang, ...
  • Chen, A., Yossef, M., & Hopkins, P. (2020). A comparative ...
  • Chen, D., Li, K., Yuan, Z., Cheng, B., & Kang, ...
  • Huang, J. Q., & Dai, J. G. (2020). Flexural performance ...
  • Tomlinson, D., & Fam, A. (2015). Flexural behavior of precast ...
  • Liu, X., Wang, X., Yang, T., & Wu, Z. (2022). ...
  • Jiang, H., Guo, Z., Liu, J., & Liu, H. (2018). ...
  • Einea, A., David C. Salmon, D. C., Tadros, M. K., ...
  • Henin, E., Morcous, G., & Tadros, M. K. (2014). Precast/Prestressed ...
  • Choi, K. B., Choi, W. C., Feo, L., Jang, S. ...
  • Mohamad, N., Khalifa, H., Abdul Samad, A. A., Mendis, P., ...
  • Zhang, M., Feng, W., Chen, K., & Li, B. (2024). ...
  • Cox, B., Syndergaard, P., Al-Rubaye, S., Pozo-Lora, F. F., Tawadrous, ...
  • Sevil Yaman, T., & Lucier, G. (2023). Shear Transfer Mechanism ...
  • Shin, D. H., & Kim, H. J. (2020). Composite effects ...
  • Huang, J. Q., & Dai, J. G. (2019). Direct shear ...
  • He, Z. Z., Pan, P., Xiao, G. Q., Shen, S. ...
  • O'Hegarty, R., Kinnane, O., Grimes, M., Newell, J., Clifford, M., ...
  • Tawil, H., Tan, C. G., Ramli Sulong, N. H., Nazri, ...
  • Goudarzi, N., Korany, Y., Adeeb, S., & Cheng, R. (2016). ...
  • Chen, A., Norris, T. G., Hopkins, P. M., & Yossef, ...
  • Bishnoi, U., Danie Roy, A. B., & Kwatra, N. (2021). ...
  • Gombeda, M. J., Naito, C. J., & Quiel, S. E. ...
  • O′Hegarty, R., West, R., Reilly, A., & Kinnane, O. (2019). ...
  • Wang, W., Zhang, X. D., Zhou, X. L., Wu, L., ...
  • Fang, Z., Liang, W., Fang, H., Jiang, H., & Wang, ...
  • Wang, W., Zhang, X. D., Ding, F. X., & Zhou, ...
  • Zhang, Y., Zhang, J., Chen, B., & Zhang, Y. (2022). ...
  • Luo, Y. B., Sun, S. K., Yan, J. B., Zhao, ...
  • Abdulkareem, T., & A. Alfeehan, A. (2018). Effect of the ...
  • Iraq Specifications No.45. (2021). Aggregate from Natural Sources for Concrete. ...
  • ASTM A1064/A1064M-18a. (2022). Standard Specification for Carbon-Steel Wire and Welded ...
  • ASTM F593-17. (2023). Standard Specification for Stainless Steel Bolts, Hex ...
  • Bastin, D. R. A., & Sharma, U. K. (2017). A ...
  • Tomlinson, D., & Fam, A. (2018). Axial load-bending moment-interaction diagram ...
  • Al-Rubaye, S., Sorensen, T., Thomas, R. J., & Maguire, M. ...
  • Bush, T. D., & Stine, G. L. (1994). Flexural Behavior ...
  • Benayoune, A., Samad, A. A., Trikha, D. N., Ali, A. ...
  • Choi, I., Kim, J. H., & Kim, H. R. (2015). ...
  • Frankl, B. A., Lucier, G. W., Hassan, T. K., & ...
  • Lorenz, R. F., & Stockwell, F. W. (1984). Concrete Slab ...
  • Zheng, T., Ge, Q., Xiong, F., Li, G., Xue, Y., ...
  • Pessiki, S., & Mlynarczyk, A. (2003). Experimental evaluation of the ...
  • Jiang, H., Guo, Z., & Liu, J. (2018). Composite Behavior ...
  • ASCE/SEI 7-16. (2017). Minimum Design Loads and Associated Criteria for ...
  • Mohamad, N., Khalil, A. I., Abdul Samad, A. A., & ...
  • Daniel Ronald Joseph, J., Prabakar, J., & Alagusundaramoorthy, P. (2019). ...
  • نمایش کامل مراجع