Investigation of Weldability of Nichrome Alloy and Metallurgical Effects of Welding Parameters on Nichrome Using TIG Welding Process
محل انتشار: دوازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 911
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME12_413
تاریخ نمایه سازی: 25 شهریور 1392
چکیده مقاله:
This study is about weldability of nichrome 8020 alloy which has been welded by TIG welding process. Generally, nichrome series alloys are used as heating elements. With considering the necessity of joining industrial parts and heating elements, making sound and applicable joints is very important. Results show that by choosing proper welding parameters, consequent joint should be without any defects but effects of high welding heat input, which have been observed in welding samples, like grain growth in the HAZ and Fusion zone, equiaxed grains in fusion boundary, heterogeneously nucleated independent grains in fusion zone and loss of hardness in the HAZ and fusion zone must be considered.
کلیدواژه ها:
نویسندگان
Sh. Afkhami
School of Metallurgy and Materials Engineering, University college of Engineering, University of Tehran, Tehran, Iran
A. Halvaee
School of Metallurgy and Materials Engineering, University college of Engineering, University of Tehran, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :