Finding the best situation of aging on Ecaped Al-Mg-Si-Cu for Improvement of both Strength and Ductility
محل انتشار: دوازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 976
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME12_296
تاریخ نمایه سازی: 25 شهریور 1392
چکیده مقاله:
Equal channel angular pressing(ECAP)with aging treatment is used on Al-Mg-Si-Cu alloy for obtaining the best mechanical properties. The results shows increase of the yield stress and UTS to 362Mpa and 475Mpa respectively. This achievement is remarkable when we observe that total elongation increase from 9% to 17%.Also we investigate effect of order of Aging and Ecap on the mechanical properties. The results show that Post Ecap Aging give the best ductility and post aging Ecap leads the best strength. At last, we compare two temperatures of 175°c and 200°c until the time of peak hardening. It found that long time-low temperature could be more appropriate.
کلیدواژه ها:
نویسندگان
R. Bagherian Azhiri
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran
K. Abrinia
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran
A. Khatouni
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran
M. Rahimi Dizaji
School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :