Experimental Study of Cutting Force Variation and Surface Roughness During High Speed Machining on Aluminum, Discontinuously Reinforced by SiC
محل انتشار: دوازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 832
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME12_211
تاریخ نمایه سازی: 25 شهریور 1392
چکیده مقاله:
The paper presented here, expresses the outcomes of an experimental study on the machining parameters of an architecturally designed, Discontinuously Reinforced Composite (DRA) during high – speed machining process performed on a CNC milling machine. The effects of feed rate and cutting speed on cutting force, surface roughness and chip formation are focused upon during the experimentation. The cutting speed ranges from 250 to 1600 m/min and feed rate is between 0.05 mm to 0.15 mm per tooth. The results show an increase in cutting and feed force with the growth in feed rate which does not follow a regular pattern from the low to high cutting speed and also there is not a same tender for all forces. Surface roughness adds up as the feed rate increases and the opposite is true for the growth in cutting speed.
کلیدواژه ها:
نویسندگان
H. Rezaee Ravari
Islamic Azad University, Science and Research branch-Tehran, Iran
J. Akbari
Centre of Excellence in Design, Robotics and Automation, School of Mechanical Engineering, Sharif University of Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :