A Theoretical Analysis of the External Tube Inversion Process in the Thin- Walled Circular Tubes
محل انتشار: دوازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,089
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME12_125
تاریخ نمایه سازی: 25 شهریور 1392
چکیده مقاله:
External inversion of thin-walled tubes using a die is used for manufacturing double-walled parts that are difficult to manufacture by any other technique. In this study, the external inversion process in the thin-walled circular tubes is investigated, theoretically and experimentally. The theoretical relationship is obtained, based on the energy method. Several deformation mechanisms are assumed in the theoretical model: bending around circular hinge line, bending in normal to meridian direction and circumferential expansion. A total inversion process in the circular metal tubes is divided to three different stages versus the inversion angle: 0≤θ≤π, π ≤θ≤2π and after θ=2π. In each stage, the total dissipated energy is calculated. The different strain components are calculated and based on the principle of energy conservation; some theoretical relations are derived to predict the instantaneous inversion force. Some circular brazen tubes are used in the external inversion tests under axial loading and the diagram of axial load-displacement is sketched. The theoretical relations can predict the variations of the axial load during the inversion process in the circular tubes with a good agreement.
کلیدواژه ها:
نویسندگان
A. Niknejad
Mechanical Engineering Department, Faculty of Engineering, Yasouj University, Yasouj, Iran
G.H. Liaghat
Mechanical Engineering Department, Faculty of Engineering, Tarbiat Modares University, Tehran, Iran
M. Moeinifard
Mechanical Engineering Department, Faculty of Engineering, Yasouj University, Yasouj, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :