Three Dimensional Finite Element Modeling of a Current Transformer and Analyzing its Operation under Normal Condition
محل انتشار: بیست و یکمین کنفرانس مهندسی برق ایران
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 828
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICEE21_482
تاریخ نمایه سازی: 27 مرداد 1392
چکیده مقاله:
As the secondary signal of the Current transformers (CTs) is used in measuring and protection schemes, the accuracy of their operation is so important. In this paper, a real current transformer is modeled using three dimensional (3D) finite element method (FEM). Then its operation is analyzed undernormal current of the primary conductor. First, the primary is positioned at the center of the current transformer. In the second stage, the operation of the CT is analyzed when the primary conductor is eccentric with respect to the CT core. At the third stage, the effect of the abrupt bends of the primary conductor onthe CT magnetic field distribution is studied. Finally, two dimensional (2D) FEM is used for analyzing the effect of thestray flux on the CT magnetic field. This stray flux is caused by the adjacent bus bar which is under an over current condition. It is shown that the situations mentioned above can cause to an asymmetric magnetic field distribution in the CT core which in turn may lead to the error in the CT secondary current and so undesirable operation of the protection schemes fed by that CT
کلیدواژه ها:
Current transformer ، Finite Element Method ، stray flux ، adjacent bus bars ، primary conductor abrupt bends
نویسندگان
H. Givi
Amirkabir University of Technology
J. S. Moghani
Member, IEEE