Design and Economical Assessment of phase to phase composite spacer in compact transmission lines
محل انتشار: نوزدهمین کنفرانس بین المللی برق
سال انتشار: 1383
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,231
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PSC19_200
تاریخ نمایه سازی: 12 آذر 1385
چکیده مقاله:
The purpose of the present investigation, which is done for the first time in Iran, is design of spacers made of composite materials for compact transmission lines. Design has been based on imposed forces including the wind aerodynamic force, gravitational force of conductors and effects of ice and snow upon the conductors. First, using the potential flow analysis of fluid mechanics, the wind force has been described and applying the weight of the conductor together with ice and snow has been calculated. Then considering the resultant force, stability and post-buckling of spacer has been discussed and appropriate diameter has been selected. Design ends with choosing of composite materials as constructing material. The spacer has been analyzed and optimized for prevention of mechanical failures and finally the blowing spacing has been obtained: For GFRP composite (Epoxy Resin) solid rod with Vf = 0.6 for nominal diameter, D = 40 mm & 54 mm, length L = 2 m & 4 m have been resulted, respectively. For GFRP composite (Epoxy resin) Hollow rod with Vf = 0.6, for Di = 40 mm & 54 mm, thicknesses of e = 7 mm & 5.2 mm calculated, respectively.
کلیدواژه ها:
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :