Safe Reinforcement Learning by Shielding based Reachable Zonotopes for Autonomous Vehicles
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 38، شماره: 1
سال انتشار: 1404
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 208
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-38-1_003
تاریخ نمایه سازی: 2 مهر 1403
چکیده مقاله:
The field of autonomous vehicles (AV) has been the subject of extensive research in recent years. It is possible that AVs could contribute greatly to the quality of daily lives if they were implemented. A safe driver model that controls autonomous vehicles is required before this can be accomplished. Reinforcement Learning (RL) is one of the methods suitable for creating these models. In these circumstances, RL agents typically perform random actions during training, which poses a safety risk when driving an AV. To address this issue, shielding has been proposed. By predicting the future state after an action has been taken and determining whether the future state is safe, this shield determines whether the action is safe. For this purpose, reachable zonotopes must be provided, so that at each planning stage, the reachable set of vehicles does not intersect with any obstacles. To this end, we propose a Safe Reinforcement Learning by Shielding-based Reachable Zonotopes (SRLSRZ) approach. It is built around Twin Delayed DDPG (TD۳) and compared with it. During training and execution, shielded systems have zero collision. their efficiency is similar to or even better than TD۳. A shield-based learning approach is demonstrated to be effective in enabling the agent to learn not to propose unsafe actions. Simulated results indicate that a car vehicle with an unsafe set adjacent to the area that provides the greatest reward performs better when SRLSRZ is used as compared with other methods that are currently considered to be state-of-the-art for achieving safe RL.
کلیدواژه ها:
نویسندگان
H. Raeesi
Department of Electrical and Computer Engineering, Babol Noshirvani University of Technology, Babol, Mazandaran, Iran
A. Khosravi
Department of Electrical and Computer Engineering, Babol Noshirvani University of Technology, Babol, Mazandaran, Iran
P. Sarhadi
Department of Engineering and Technology, University of Hertfordshire, Hatfield, Hertfordshire, United Kingdom
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :