Experimental Investigation of the Hybrid Nanoparticles into the LiCl Liquid Desiccant as Nanofluid on the Efficiency of Absorption Dehumidification System
سال انتشار: 1403
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 61
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JHMTR-11-1_001
تاریخ نمایه سازی: 24 شهریور 1403
چکیده مقاله:
In this study, to increase the heat and mass transfer coefficients in the system, a combination of liquid desiccant such as lithium chloride (LiCl) and hybrid nanoparticles of multi-walled carbon nanotubes (CNT-MW) Aluminum Oxide (Al۲O۳) and silicon oxide (SiO۲) has been used. Poly-Vinyl Pyrrolidone (PVP) surface activator or surfactant has been used for complete stability of hybrid nanoparticles in lithium chloride (LiCl) desiccant solution and liquid water. By the experimental data, heat and mass transfer coefficients in the system have been determined in a relational way for different combinations of nanoparticles and adsorbents. The effect of important parameters such as air flow intensity and desiccant liquid, air temperature and humidity, temperature and composition of incoming desiccant liquid nanofluid on the efficiency of the system has been studied. And from there the exergy analysis of the system has been done. In this way, the best operating conditions for the better performance of the system containing liquid desiccant nanofluid have been determined. The results of this research have clearly shown that, changes in the air humidity and temperature have been increased by adding the hybrid nanoparticles to LiCl/H۲O liquid desiccant. In this regard, the mass transfer rate has been improved from ۳.۴۱% to ۲۸.۳% and the heat transfer rate has been improved from ۴.۱۸% to ۲۹.۱۱%. So, the average improvement has been ۲۳.۲۳% and ۲۲.۲۲%, respectively. Adding hybrid nanoparticles to LiCl/H۲O liquid desiccant has increased the mass transfer coefficient from ۱۷.۴۲% to ۲۹.۲۶% and the heat transfer coefficient from ۱۹.۸۳% to ۳۳.۵۵%. Therefore, according to these results, the average value of improvement in mass and heat transfer coefficients has been about ۲۲.۷۳% and ۲۶.۵۱%, respectively.
کلیدواژه ها:
نویسندگان
Seyed Amir Hossein Zamzamian
Materials and Energy Research Center (MERC), Imam Khomeini Blv., Meshkindasht, Karaj, P.O.Box ۳۱۷۸۷-۳۱۶, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :