Flexural Strengthening of Deficient Reinforced Concrete Beams with Post-Tensioned Carbon Composites Using Finite Element Modelling

سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 89

فایل این مقاله در 19 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_CIVLJ-8-4_003

تاریخ نمایه سازی: 23 شهریور 1403

چکیده مقاله:

The application of external post-tensioned steel bars as an effective way to strengthen an existing bridge has been so far used in many different countries. In recent decades, however, they have been replaced by bars made from Carbon Fiber Reinforced Polymer (CFRP), as a material with high tensile strength and corrosion resistance, to address several concerns with steel bars such as their application costs and difficulties, and also their durability.  Post-tensioning these sheets can be a new efficient method in strengthening the beams and utilizing the high strength of these material.This study has focused on the flexural behavior of beams reinforced by Post-tensioned non-bonded CFRP sheets. ۱۵ beams were categorized in ۳ groups of ۵m-, ۱۰m-, and ۱۵m-span in order to evaluate the effect of some parameters such as level of post-tensioning, sheet length, and beam span on its load capacity, failure mode, ductility, and cracks behavior. The results indicate that even though the increase in post-tensioning levels improves the effectiveness of the method, but this capacity improvement is much more for small span beams especially when CFRP sheets are ۹۰% of the beam span, compared to long span beams. There has been a noticeable capacity increase around ۵۰% in the beams when decreasing the sheet length from ۹۰% to ۴۵% of the beam span and also causing ۱۱-۱۴% increase in ductility in various conditions.

نویسندگان

Abuzar Hamzenezhadi

Ph.D. Candidate of Structural Engineering, Faculty of Civil Engineering, Semnan University, Semnan, Iran

Mohammad Sharbatdar

Associate Professor, Faculty of Civil Engineering, Semnan University, Semnan, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • . Kadhim, A. M., Numan, H. A., & Özakça, M. ...
  • . Marthong, C. (۲۰۱۹). Rehabilitation of exterior RC beam-column connections ...
  • . Mustafa, S. A., & Hassan, H. A. (۲۰۱۸). Behavior ...
  • . Delgado, P., & Kappos, A. (۲۰۱۸). Strengthening of RC ...
  • . Yang, J., Haghani, R., & Al-Emrani, M. (۲۰۱۸, July). ...
  • . Zhang, H. Y., Yan, J., Kodur, V., & Cao, ...
  • . Sharif, A., Al-Sulaimani, G.J., Basunbul, I.A., Baluch, M.H. and ...
  • . Quantrill RJ.; Hollaway LC.; “The Flexural Rehabilitation of Reinforced ...
  • . Wang X.; Zhou Ch.; “Calculation of Flexural Strength of ...
  • . Bastani, A., Das, S., & Kenno, S. Y. (۲۰۱۹). ...
  • . Choobbor, S. S., Hawileh, R. A., Abu-Obeidah, A., & ...
  • . Siddika, A., Al Mamun, M. A., Alyousef, R., & ...
  • . Lee, H., Jung, W. T., & Chung, W. (۲۰۱۹). ...
  • . Gil, L., Bernat-Masó, E., & Escrig, C. (۲۰۱۹). Experimental ...
  • . ACE Consulting Engineers, Brisbane, Australia. “Strength and ductility of ...
  • . ACI Committee ۴۴۰. “Guide for the Design and Construction ...
  • . Canadian Standards Association, S۸۰۶-۰۲. Design and Construction of Building ...
  • . Japanese Society of Civil Engineers (JSCE). (۱۹۹۷). “Recommendation for ...
  • . ISIS Canada Design Manuals, ۲۰۰۱, “Strengthening Reinforced Concrete Structures ...
  • . ANSYS User’s Manual Version ۱۰.۰. Houston: Swanson Analysis Systems ...
  • . Yang D.S.; Park S.K; Neale K.W.; “Flexural behavior of ...
  • . Iranian National Building Codes Compilation Office. Iranian National Building ...
  • نمایش کامل مراجع