Simplified modelling and seismic retrofitting of a flat-slab RC structure

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 870

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICCT04_140

تاریخ نمایه سازی: 7 مرداد 1392

چکیده مقاله:

The construction of reinforced concrete (RC) buildings with flat-slab systems has become widely used in some high seismicity European countries. This type of structure is particularly common both for office and residentialbuildings, taking advantage of the reduced floor height to meet economical and architectural demands. Even though some national codes may include rules for the design of these structures, the provisions of Eurocode 8 don’t cover flatslab frames used as part of the lateral load resisting system. The behaviour of this type of structural systems with slabframes used as seismic resistant elements shows important drawbacks, such as the essentially non-dissipative featuresof their seismic response. Main results of seismic analyses performed on a six-story RC building structure are reportedin this study. The building was modelled according to a simplified approach based on the effective beam width method,which allowed to change the original flat-slab structure into a frame system consisting of beams and columns. The structural response was predicted using nonlinear static and dynamic analyses with artificial ground motion records with increasing intensity. Different seismic retrofit techniques were applied to enhance the seismic performance of the structure including: 1) the insertion of shear wall; 2) the addition of RC column jackets; 3) confinement of the column plastic hinge regions using FRP wrapping. A mixed retrofitting intervention was also considered to allow the structure to withstand stronger seismic excitations. The predicted seismic performance of the retrofitted models was compared to that of the unretrofitted counterpart. Numerical investigations provide information about the seismic performance of a common type of RC structure not covered by the provisions of Eurocode 8 as well as the potential to mitigate the damage for varying earthquake intensities through different retrofit techniques.

نویسندگان

Marco Valente

Politecnico di Milano

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • CEN (2004). European Standard EN 1998-1. Eurocode 8: Design of ...
  • CEN (2005). European Standard EN 1998-3. Eurocode 8: Design of ...
  • Italian Standard (2008). Norme Tecniche per le Costruzioni NTC. (in ...
  • ACI 318-05 (2005). Building Code Requirements for Structural Concrete (318-05) ...
  • Valente M. (2011). Seismic performance assessmen and retrofitting of a ...
  • Zaharia R., Taucer F., Pinto A., Molina J., Vidal V., ...
  • Vanderbilt D.M. (1981). Equivalent Frame Analysis of Unbraced Reinforced Concrete ...
  • Hwang S.J., Moehle J.P. (2000). Models for Laterally Loaded Slab-Columt ...
  • SeismoStruct (2007). SeismoStruct _ A Computer Program for Static and ...
  • Mander J.B., Priestley M.J.N., Park R. (1988). Theoretical Stress-Strain Model ...
  • Martinez -Rueda J.E., Elnashai A.S (1997). Confined concrete model under ...
  • Menegotto M., Pinto P.E. (1973). Method of analysis for cyclically ...
  • نمایش کامل مراجع