Influence of the yield strength of the LRB base isolation on the response of the isolated buildings in the Near-Fault

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,196

فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICCT04_121

تاریخ نمایه سازی: 7 مرداد 1392

چکیده مقاله:

Seismic base isolation are devices that used to limit the human and material damage caused by an earthquake. This devices diffuse the energy induced at the time of the earthquake before being transferred to the structure.The base isolated structures when subjected to the near-fault eathquakes which contain long-period velocity pulses that may coincide with the period of base isolated structures resulting in excessive deformation and rupture of isolators. Therefore, a parametric study on the yield strength of the lead rubber bearing isolation system carried out in this work has allowed the evaluation of the influnce of the yield strength of this seismic base isolation system on the dynamic response of the isolated structures in term of displacment, acceleration and absorbed energy. The results showed that the increase in the bearing yield strength causes the bearing displacment decreased signficantly without special effects on the superstructure accelerations.

نویسندگان

Beytollah Taromi

Ms of Zanjan University

Kiarash Nasserasadi

Assistant Professor, Department of Civil Engineering, Zanjan University

Asghar VataniOskouei

Assistant Professor, Department of Civil Engineering, Shahid Rajaee University

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Hall, JF. Heaton, TH. Halling, MW. Wald, DJ., (1995), "Near-Source ...
  • Providakis, C.P., (2007), "Pushover analysis of base-isolated steel-concrete composite structures ...
  • Naeim, F., (1995), _ seismic design implications of the 1994 ...
  • Buckle, I. G. and Mayes, R. L., (1990), "Seismic isolation ...
  • Komodromos, P., (2000), "Seismic isolation for earthquake resistant structures", WIT ...
  • Jangid, RS. (2007), "Optimum lead-rubber isolation bearings for near-faul motions", ...
  • Chan Win, A, (2008), "Analysis and design of base isolation ...
  • Computers and Structures Inc., :SAP2000 Static and dynamic finite element ...
  • Naeim, F., (2001), "The seismic Design Handbook, 2nd edition, Kluwer ...
  • Symans, MD., _ Seismic protective systems: Seismic isolation", Advanced Earthquake ...
  • نمایش کامل مراجع