A Systematic Study on Mechanical Properties of CNT Reinforced HDPE Composites Developed Using ۳D Printing

Several extensive researches are being carried out in the field of ۳D printing. Polymer matrices, such as High-Density Polyethylene (HDPE), are less explored in particular on the microstructure and mechanical properties of HDPE composites developed via Fused Deposition Modelling (FDM) process. Very scarce amount of works is devoted to study HDPE’s reinforced with carbon nano-tubes (CNT’s) . In the present work, we report on the mechanical properties of  HDPE composites prepared via FDM process. Varying proportions of CNTs ( ۰.۵, ۱, ۱.۵ and ۲%) are used as reinforcements. It is found that increasing CNT content enhances impact and tensile strength, with HDPE/۲.۰%CNT outperforming pure HDPE by approximately ۷۱.۶% and ۲۵.۴%, respectively. HDPE/۲.۰%CNT composite also showed Young's modulus approximately ۴۹.۲% higher than pure HDPE. According to fracture analysis, pure HDPE failed near ductile, whereas composites failed brittle. CNTs occupy the free positions in the polymeric chains, and their tendency to restrict chain mobility causes HDPE to lose ductility and begin to behave brittle. The use of CNTs as reinforcement successfully improved the mechanical properties of HDPE.

کلیدواژه ها:

Fused deposition modelling ، Carbon nanotubes ، Mechanical properties ، Fracture