The development and implementation of current injection controller system based on FPGA on 25KA current injection machine
محل انتشار: بیستمین کنفرانس بین المللی برق
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: فارسی
مشاهده: 1,163
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PSC20_002
تاریخ نمایه سازی: 8 آذر 1385
چکیده مقاله:
In this paper we present the development and implementation of current injection controller system based on FPGA. The system receives information of output current from user, such as current value and time of flowing current to load, and controls the output current. The system turn the middle head of autotransformer and changing output current automatically between 0 and 25KA. This system consists of a mixed mplementation of software and hardware. The hardware is consists of two part; main part is connecting to stepper motor and turning middle head of autotransformer to adjust output current and the next part of hardware is sensing temperature of autotransformer and sends it to computer. The software is running in computer and gives this data and plot T-t diagram. The hardware were implemented by using FPGA and the software was implemented in C++Builder.
کلیدواژه ها:
نویسندگان
Rouhollah Afshari
High Voltage and Magnetic Materials Research Centre Iran University of Science & Technology
Hossein Haydari
High Voltage and Magnetic Materials Research Centre Iran University of Science & Technology
Abdolreza Rahmati
High Voltage and Magnetic Materials Research Centre Iran University of Science & Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :