3 Dimensional Finite Element Analysis of theHuman Wrist Joint without Ligaments underCompressive Loads
محل انتشار: هفدهمین کنفرانس مهندسی پزشکی ایران
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,293
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICBME17_192
تاریخ نمایه سازی: 9 تیر 1392
چکیده مقاله:
Damage of carpal ligaments is very common in daily living. Yet its mechanical behavior on the carpal bones is unclear when the ligaments are omitted from the carpal joints. In this study, our goal was to perform a computational analysis of the carpal biomechanics without ligaments. A three-dimensional finite element model of the wrist was constructed which includes the carpal bones, the cartilages and the proximal metacarpals.All of the bones were modeled with the cartilage layers smoothly embedded in them. 100-Newton pressure load was applied to the upper section of the second and the third metacarpals. The effect of dividing ligaments on the contact stress distribution in the Radio-Scaphoid, the Radio-Lunate and the mid-carpal joints were studied. By dividing the ligaments, all the carpal bones are moved to the radius direction. Therefore the contact stresses inthe radio-scaphoid & the radio-lunate are increased. Furthermore, the contact stress between the mid-carpal joints changed little.
کلیدواژه ها:
component ، Contact Stress ، Exact Modeling ، Humanwrist joint ، Mimics ، 3D finite element analysis
نویسندگان
Aryan Javanmardian
Biomechanics Department Iran University of Science & Technology Tehran, Iran
Mohammad Haghpanahi
Biomechanics Department Iran University of Science & Technology Tehran, Iran