An Experimental Study on the Effect of Surface Orientation and Inclination on Incident Solar Irradiation: Application to Buildings
سال انتشار: 1403
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 90
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JREE-11-1_012
تاریخ نمایه سازی: 31 تیر 1403
چکیده مقاله:
The study explores the impact of surface orientation and tilt on incident solar irradiation. It was conducted in M'Sila, an Algerian province, from February to June. A number of experiments were carried out using an experimental setup consisting of a heliometer and a slant changer, which allowed for the variation of the tilt angle. Nineteen tilt angles ranging from ۰° to ۹۰° were investigated for the four main directions: North, South, East, and West. The obtained outcomes were statistically analyzed. At east and south orientations, incident solar irradiance rose as a function of tilt angle, reaching a maximum at the optimal angle, and then gradually decreased. Generally, the incident solar irradiance decreased as the tilt angle increased in the case of west and north orientations. The tilt angle of the exposed surface as well as the sun's elevation in the sky affected the amount of intercepted energy significantly at each orientation (p<۰.۰۵). When the sun was low in the sky, the south orientation was most preferred for an inclination greater than or equal to ۲۵°. The north-facing surfaces with steep slopes (β³ ۵۵°) received the least amount of solar radiation. These results hold great importance, particularly in the building sector, as they can be utilized to achieve energy saving.
کلیدواژه ها:
نویسندگان
Mohamed Chouidira
Department of Mechanical Engineering, Faculty of Technology, University of Med Boudiaf, M’sila, Algeria.
Nabila Ihaddadene
Department of Mechanical Engineering, Faculty of Technology, University of Med Boudiaf, M’sila, Algeria.
Razika Ihaddadene
Department of Mechanical Engineering, Faculty of Technology, University of Med Boudiaf, M’sila, Algeria.
Jed Mohamed El Hacen
Department of Mechanical Engineering, Faculty of Technology, University of Med Boudiaf, M’sila, Algeria.
Younes Kherbiche
Department of Mechanical Engineering, Faculty of Technology, University of Med Boudiaf, M’sila, Algeria.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :