Optimization of In-situ Synthesis Process Parameters of LiFePO۴/C-MAF-۵ Surface Modification for Conductivity Improvement of Lithium-ion Battery Cathode Material by Response Surface Method
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 37، شماره: 10
سال انتشار: 1403
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 51
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-37-10_010
تاریخ نمایه سازی: 23 تیر 1403
چکیده مقاله:
This study presents an evaluation of the conductivity of in-situ synthesis of LiFePO۴/C-MAF-۵ through the use of Response Surface Methodology (RSM) in optimizing process parameters.. Performance and optimization were established by combining RSM with the experimental carbonation process, crystallographic analysis using X-ray diffraction (XRD), and Fourier infrared spectroscopy (FT-IR). The results revealed that crystal structure is important in determining electrical properties, with conductivity consistently higher at smaller sample sizes. Furthermore, the main focus is provided on how the lattice parameters and electrical conductivity of LiFePO۴ are affected by particle size. The higher electrical conductivity is due to the smaller particles, where reduced lattice strain is indicated. Furthermore, the success of the synthesis process was confirmed by the absorption peaks that corresponded to the expected LiFePO۴ features and corresponded to specific vibrational methods as presented in the FT-IR spectrum results. The complex relationship between conductivity, LiFePO۴ amount, and imidazole concentration is demonstrated by the RSM contour plot. It was found that the optimal LFP concentration was ۴ mol, the ideal Imidazole concentration was ۵۸.۷۹ mol, and the optimal temperature was set at ۷۰۰ °C. Under these recommended operating conditions, the resulting conductivity was determined to be ۰.۰۰۰۰۵۹۲ S cm-۱.
کلیدواژه ها:
نویسندگان
A. D. Shieddieque
Department of Chemistry, Universitas Padjadjaran, Bandung, Indonesia
I. Rahayu
Department of Chemistry, Universitas Padjadjaran, Bandung, Indonesia
S. Hidayat
Department of Physic, Universitas Padjadjaran, Bandung, Indonesia
J. A. Laksmono
Research Center for Polymer Technology, National Research and Innovation Agency (BRIN), South Tanggerang, Indonesia
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :