Estimation Methodology of Pressure Losses in Non-circular Pipes
سال انتشار: 1403
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 31
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-17-7_002
تاریخ نمایه سازی: 18 اردیبهشت 1403
چکیده مقاله:
The article presents a methodology for determining the hydraulic resistance multiplier, used for a rapid estimation of linear losses in pipes with non-circular cross-sections. The numerical approach was applied using the Finite Volume Method and the ANSYS Fluent software. The research was conducted under turbulent flow conditions, covering two Reynolds number ranges: ۱۰,۰۰۰ to ۱۰۰,۰۰۰ (۱۰ cases) and ۱۰۰,۰۰۰ to ۱,۰۰۰,۰۰۰ (۵ cases). The first section of the article presents calculations of losses for a circular pipe, accompanied by a mesh test and error estimation. The second section includes calculations conducted for a series of pipes with various selected cross-sectional shapes: half-circle, quarter-circle, square, rectangles with aspect ratios of ۲:۱ and ۳:۱, isosceles triangle, and equilateral triangle. The last section of the article discusses the calculation of linear losses and the hydraulic resistance multiplier for each tested shape. It was found that this coefficient ranged from ۱.۳۳ to ۲.۲, depending on the shape, with the influence of the Reynolds number being relatively insignificant.
کلیدواژه ها:
نویسندگان
W. Sobieski
University of Warmia and Mazury in Olsztyn, Olsztyn, ۱۰-۹۰۰, Poland
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :