Deflection, buckling and vibration analyses for a sandwich nanocomposite structure with foam core reinforced with GPLs and SMAs based on TSDBT
محل انتشار: مجله مکانیک کاربردی محاسباتی، دوره: 55، شماره: 2
سال انتشار: 1403
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 79
فایل این مقاله در 33 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCAM-55-2_010
تاریخ نمایه سازی: 9 اردیبهشت 1403
چکیده مقاله:
The purpose of this research is to investigate deflection, buckling and vibration for a five-layer sandwich nanocomposite beam, with reinforcements of graphene platelets (GPLs) and shape memory alloys (SMAs), and a foam core. To predict the behavior of the beam, theoretical formulations are derived based on the third order shear deformation beam theory (TSDBT). In order to check the validity and accuracy of the present work, the obtained results are compared with the results of other works and there is a good compatibility between them. It is concluded from this research that by using foam as the core, the weight of the structure is reduced, and also, the use of GPLs and SMAs as a reinforcement in the beam structure increases the stiffness and the equivalent elasticity modulus, so the ratio of strength to the weight of the structure increases. As a result of which the deflection decreases, the critical buckling load and the natural vibration frequencies of the beam increase. For example, it can be seen in the results that by increasing the volume fraction of GPL from ۰ to ۰.۰۳, the deflection of the beam decreases by ۴۴% and the first natural frequency of vibration and the critical buckling load increase by ۳۱% and ۷۹%, respectively.
کلیدواژه ها:
نویسندگان
M. Arabzadeh-Ziari
Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran P.O. Box ۸۷۳۱۷-۵۳۱۵۳
M. Mohammadimehr
Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran P.O. Box ۸۷۳۱۷-۵۳۱۵۳
E. Arabzadeh-Ziari
Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran P.O. Box ۸۷۳۱۷-۵۳۱۵۳
M. Asgari
Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran P.O. Box ۸۷۳۱۷-۵۳۱۵۳
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :