Designing and Fabrication of High Frequency Ultrawide Band Passive Phase Shifters with Single Layer Microstrip Structure and Unequal Source and Load Impedances
سال انتشار: 1403
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 96
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IECO-7-1_007
تاریخ نمایه سازی: 20 فروردین 1403
چکیده مقاله:
In this paper, a method is presented to design and implement ultra-wideband phase shifters, in frequency ranges higher than ۱۰ GHz, with fractional bandwidth near a hundred percent. The phase shifter is constructed from microstrip transmission lines and short circuit stubs. In comparison with conventional phase shifters which are composed of microstrip coupled lines and multilayer structures, the proposed phase shifter has advantages from the implementation and fabrication viewpoint. The design and optimization method is in such a way that arbitrary phase shift, source and load impedances may be considered in the design. To optimize the circuit dimension, a computer code is written, and two design examples are considered. The computer code is based on closed form equations for microstrip transmission lines and available circuit models for it and utilizes microwave network equations. Its results are then improved with electromagnetic full-wave packages to consider the parasitic effects of microstrip T-junctions. Two design cases are included, in the first design, the case of a ۴۵ degrees phase shifter with a standard ۵۰ ohms source and load impedances is investigated. In the second design case, the case of a ۹۰ degrees phase shifter with ۵۰ ohms input impedances and ۷۵ ohm non-standard output impedances is considered. By observing the full-wave simulation results as well as the fabrication and measurement results in these examples, it is clear that the design goals are highly satisfied by this method.
کلیدواژه ها:
نویسندگان
Habibollah Zolfkhani
Department of Electrical Engineering, Faculty of Engineering, University of Zanjan, Zanjan, Iran
Alireza Sharifi
Department of Electrical Engineering, Faculty of Engineering, University of Zanjan, Zanjan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :