Effect of Equivalence Ratio on Flame Morphology, Thermal and Emissions Characteristics of Inverse Diffusion Porous Burner
سال انتشار: 1403
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 60
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-17-6_007
تاریخ نمایه سازی: 20 فروردین 1403
چکیده مقاله:
The diffusion porous media combustion is one possible way to eliminate the drawbacks of the existing combustion systems. Inverse diffusion flame (IDF) has features of both premixed and non-premixed flames. To integrate the advantages of porous media combustion with IDF, inverse diffusion porous (IDP) medium burner is tested for change in flame morphology and emissions at different equivalence ratio (ɸ). The porous media located at the exit of IDF burner has potential to deliver minimum flame length with low emissions. Flame appearance, flame height, flame zones etc. and emissions are experimentally investigated. Methane is used as fuel. Visible flame height is captured digitally and evaluated using ImageJ software. Central plane flame temperature is measured experimentally. CO and NOX emissions are recorded with Testo-۳۴۰ flue gas analyser. The use of porous media at flame base is beneficiary in terms of achieving better air-fuel mixing and radial diffusion of air-fuel mixture. This reduces flame height with porous medium at all range of ɸ. Increase in ɸ reduces CO and enhances NOX emissions. Porous media reduces CO by ۷۵ % and NOX by ۶۰ %. Inverse diffusion porous medium burner emits lowest emissions in rich conditions.
کلیدواژه ها:
Equivalence ratio ، Flame morphology ، Porous media burner ، Inverse Diffusion combustion ، CO and NOX emissions
نویسندگان
A. Dekhatawala
Department of Mechanical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat, ۳۹۵۰۰۷, India
P. V. Bhale
Department of Mechanical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat, ۳۹۵۰۰۷, India
R. Shah
Department of Mechanical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, Gujarat, ۳۹۵۰۰۷, India
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :