Feasibility of Joining Al-20%Mg2Si In-Situ Composite By TIG Welding
محل انتشار: دومین کنفرانس بین المللی آلومینیوم
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,264
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC02_089
تاریخ نمایه سازی: 12 اردیبهشت 1392
چکیده مقاله:
The feasibility of joining an in situ Al-20%Mg2Si composite by TIG is investigated. Welding current was varied at five different values between 80 and 100 amp. Different areas were identified in the weldment region due to effect of welding specification. Mechanical properties of joints were evaluated by Tensile and microhardness tests. Joints welded with a welding current in the range of 80-85 amp displayed the highest degree of hardness. The fracture produced in the welded specimens was in the base metal MMC, indicating a strong interface between the base MMC and the weld. Therefore, the study finds that in situ Al-Mg2Si MMC can in fact be welded using TIG and Al-Si filler metal.
کلیدواژه ها:
نویسندگان
Amirreza Jahangiri
Department of Manufacturing Engineering, FKM, Universiti Teknologi Malaysia, Johor, ۸۱۳۱۰, Malaysia
Mohd Hasbullah Idris
Department of Manufacturing Engineering, FKM, Universiti Teknologi Malaysia, Johor, ۸۱۳۱۰, Malaysia Department of Materials Engineering, FKM, Universiti Teknologi Malaysia, Johor, ۸۱۳۱۰, Malaysia
Saeed Farahany
Department of Materials Engineering, FKM, Universiti Teknologi Malaysia, Johor, ۸۱۳۱۰, Malaysia
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :