Theoretical investigation of roll bonding process of clad sheets by finite element method
محل انتشار: دومین کنفرانس بین المللی آلومینیوم
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,105
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC02_069
تاریخ نمایه سازی: 12 اردیبهشت 1392
چکیده مقاله:
Roll bonding is a solid-state welding process to join similar and dissimilar metals and a well-established and widely used manufacturing process. In this study the rolling process of St12/Al1050 clad strips were simulated by finite element methods (FEM). Effects of various parameters such as the total thickness reduction of strip and friction coefficient in roll-sheet interface upon the bonding behaviour and deformation of each sheet were also studied. The validity of FEM results were verified according to experimental investigations that showed satisfactory consistency with experimental results.
کلیدواژه ها:
نویسندگان
A. Rezaii
Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran
H. Danesh Manesh
Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :