Effect of annealing temperature on synthesis of aluminum carbide with mechanical alloying process

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,489

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IIAC02_032

تاریخ نمایه سازی: 12 اردیبهشت 1392

چکیده مقاله:

Guidelines Aluminium and its alloys due to the ease of formability and lightweight have a wide application in variety of industries including aerospace, automotive, electronics and so on. But because do not have enough strength in some engineering applications, many research has been on the production of aluminium composites by mechanical alloying process in recent years. In this study the effect of annealing temperature on the synthesis of aluminium carbide product whit mechanical alloying process has been studied. Phase formation and particle size identified by scanning electron microscopy and X-ray diffraction analysis and determine the optimal grinding. The experimental results show that no chemical interaction occurred between Al powders and carbon black during mechanical alloying processing and mechanical alloying causing high deformation of powders, which results in the formation of amorphous structure. after the mechanical alloying for 30 hours, and the annealing temperature in 550 ºC resulted in higher deformation of Al particles and caused a high internal energy, This energy facilitated the formation of the Al4C3 phase during sintering

نویسندگان

Ebrahim Aghababaie

Department of materials science and engineering, University of Najafabad branch, Esfahan, Iran

Mohsen Saboktakin

Department of materials science and engineering, University of Najafabad branch, Esfahan, Iran

Reza Ebrahimi

Department of materials science and engineering, University of Najafabad branch, Esfahan, Iran

Masoud kasiri

Department of materials science and engineering, University of Najafabad branch, Esfahan, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • H. Arik, "Production and c haracterization of in situ 4864. ...
  • I.A. Ibrahim, F.A. Mohamed, E..J. Lavemi, Al4C3, " J. Mater. ...
  • "Particulate reinforced metal matrix composite, " J. Mater Science, Vol. ...
  • Y.X. Lu, X.M. Meng, C.S. Lee, _ Microstructue and AM. ...
  • J.S. Benjamin, E. Artz, C. Schultz, "New Materials by ...
  • J.J. Fischer, J.H. Weber, "Mechanical alloying, " J. Advanced Mater ...
  • R.M. German, "Powder metallurgy Science, " New Jersey Metal Powder. ...
  • J.H. Tweed, "Manufacture of 2014 aluminum reinforced with SiC particulate ...
  • G. Jangg, M. Slesar, M. Besterci, "Influence of heat treatment ...
  • R.F. Singer, W.C. Oliver, W.D. Nix, "Identification of dispersoid phases ...
  • J.A. Rodriguez, J.M. Gallardo, E.J. Herrera, "Structure and properties of ...
  • C. Suryanarayana, "Bibliography On mechanical alloying and milling, " Cambridge ...
  • نمایش کامل مراجع