Intermetallic Formation by Heat Treatment of Explosively Welded Al-Ti Layers
محل انتشار: دومین کنفرانس بین المللی آلومینیوم
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,696
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC02_001
تاریخ نمایه سازی: 12 اردیبهشت 1392
چکیده مقاله:
Metallic-intermetallic laminate (MIL) composites are promising materials for the aerospace industry and other applications. One of the interesting laminate composites is Ti-TiAl3. In this work commercially pure aluminum and titanium with almost equal thickness (almost 0.5 mm) joined explosively together and then rolled. The resulted composite annealed in 630 ℃ in different times to form intermetallic. The resulted structure studied by optical and scanning electron microscopy and Energy Dispersive Spectroscopy (EDS). TiAl3 was the only phase that observed in all annealing periods. Kinetics of the formation of TiAl3 calculated and compared to the researches that had been done on Ti-Al layers (without explosive welding). The effect of explosive welding and rolling on the kinetics of intermetallic formation was investigated.
کلیدواژه ها:
نویسندگان
F. Foadian
Materials and Metallurgical Engineering, Iran University of Science and Technology, Narmak, Tehran, ۱۶۸۴۶۱۳۱۱۴, Iran
M. Soltanieh
Materials and Metallurgical Engineering, Iran University of Science and Technology, Narmak, Tehran, ۱۶۸۴۶۱۳۱۱۴, Iran
A. Adeli
Materials and Metallurgical Engineering, Iran University of Science and Technology, Narmak, Tehran, ۱۶۸۴۶۱۳۱۱۴, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :