Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles
محل انتشار: مجله سرامیک های پیشرفته، دوره: 9، شماره: 2
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 112
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ACERPT-9-2_004
تاریخ نمایه سازی: 30 بهمن 1402
چکیده مقاله:
Ceramic nozzles are unique options in aerospace industry due to their ability to operate at high temperatures. However, their brittleness, structural defects, poor formability, and need for complex methods for measuring their mechanical properties are among the main obstacles to their development. In this study, four different conical nozzles were produced through Plasma Spray Forming (PSF). Given that Yttria-Stabilized Zirconia (YSZ) is one of the most common materials in high-temperature applications, it is considered as the base material. Throughout the research, three YSZ alternatives were investigated by changing the chemical composition (Ceria-Yttria co-Stabilized Zirconia (CYSZ)), by changing the particle size (nanostructured YSZ), and by double layer architecture design. The mechanical properties of the conical nozzles were then evaluated by the nanoindentation test using Oliver and Pharr method. This method can be quick and applicable for evaluation of the mechanical properties of ceramic parts based on the load-depth curve. X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) were performed for the phase analysis and coating microstructure and porosities investigation. The results highlighted the promising features of nano-structured YSZ that are strongly based on the presence of nano-zones inside the coating structure.
کلیدواژه ها:
نویسندگان
Sana Seifollahpour
MSc, School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Tehran, Iran
Afshin Ashofteh
Assistant Professor, Mahallat Institute of Higher Education, Mahallat, Markazi, Iran
Amir Hossein Shahdadi
PhD, School of Mechanical Engineering, Sharif University of Technology, Tehran, Tehran, Iran
Mahmoud Mosavi Mashhadi
Professor, School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :