A fracture mechanics approach for analyzing spiral weld pipes containing crack

سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,523

فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IPPC01_056

تاریخ نمایه سازی: 20 آبان 1385

چکیده مقاله:

Spiral weld pipes are used extensively in the gas and oil industries. Compared to the longitudinal seam pipes, the spiral weld pipes can be manufactured straighter, rounder, longer and with more uniform stress distribution and higher rigidity. However, because of the longer weld line these pipes are more susceptible to damage due to the growth of cracks and defects which exist or are generated in the weldment area. Therefore, it is important to investigate the integrity and the remaining service life for the defected spiral weld pipes. Due to the arbitrary orientation of cracks and application of various external loads in spiral pipes, these pipes experience complex state of stress and deformation. In such cases, crack growth may occur under any combination of shear and tensile loads in the cracked area. In this paper, the application of a fracture criterion called the maximum hoop stress (MHS) criterion is described for predicting the integrity of cracked spiral weld pipes. This criterion can evaluate both the direction of fracture initiation and the final sustainable load of gas and oil pipes containing crack. The failure design curve which is presented in this paper for different loading types and crack orientations can be used for failure assessment of cracked spiral weld pipes or other similar engineering applications.

نویسندگان

Aliha

fatigue and Laboratory, Department of Mechanical Engineering Iran University of Science and Technology

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Jira , J., Jirova, J and Micka, M. (2001) Modelling ...
  • Metals Handbook, Vol. 11 Failure Analysis and Prevention, American Society ...
  • Roberts, B. (1994) Monitoring the quality of welded tube and ...
  • Narasimha Rao, K., Kundu, S.K., Patil, B.G. and Avtar, R. ...
  • Erdogan, F. and Sih, G.C. (1963). On the crack extension ...
  • Sih G.C. (1973). Methods of analysis and solutions of crack ...
  • Hussain M.A., Pu S.L. and Underwood J. (1974). Strain energy ...
  • Williams, M.L. (1957) On the stress distribution at the base ...
  • Williams J.G, Ewing P.D. (1972) Fracture under complex stress _ ...
  • Ayatollahi, M.R., Smith, D.J. and Pavier M.J. (2001) Effect of ...
  • Ayatollahi, M.R., Smith, D.J. and Pavier M.J. (2002) Crack tip ...
  • نمایش کامل مراجع