Impact of the milling time upon sintering behavior of Carbon FiberReinforced Silicon Carbide composite
محل انتشار: دوازدهمین کنگره سرامیک ایران
سال انتشار: 1398
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 81
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICC12_085
تاریخ نمایه سازی: 19 بهمن 1402
چکیده مقاله:
Ceramic matrix composites are consider for special properties such as high tensile and flexuralstrength, low density and light weight. Preparation of raw materials have important impact uponproperties of sintered composite. The aim of this work is to evaluate effect of the milling time onmorphology, crystalline size and mean strain of raw materials. The powders mixture of ۶۵.۶wt.%of SiC powders, ۱۰wt.% additive with ۲۴.۴wt.% carbon fibers were mixed by a planetary ballmill for ۱۰ hours in steel cup and ethanol as the grinding media. During process ۱ gr sample wastaken every hour. Phase type, crystallite size and mean strain were obtained by X-ray diffractionpattern. In order to morphology identification scanning electron microscopy and field emissionscanning electron microscopy were used. Results demonstrated that increasing milling time gaverise to the reduction of crystalline size, increasing of mean strain and damage on carbon fiberssurface which had negative impact on sintered sample. Finally uniform mixture of powders andcarbon fibers were produced.
کلیدواژه ها:
نویسندگان
Mahboubeh Moslemi
Graduate Student, Ceramics Department, Materials and Energy Research Center (MERC), Tehran, Iran
Mansour Razavi
Associate Professor, Ceramics Department, Materials and Energy Research Center (MERC), Tehran, Iran
Mohammad Zakeri
Assistant Professor, Ceramics Department, Materials and Energy Research Center (MERC), Tehran, Iran
Mohammad Reza Rahimipour
Professor, Ceramics Department, Materials and Energy Research Center (MERC), Tehran, Iran,