Influence of Cover Factor on the Physical Properties of Woven Fabrics
محل انتشار: نشریه نساجی و پلیمر، دوره: 10، شماره: 1
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 101
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ITAST-10-1_005
تاریخ نمایه سازی: 14 بهمن 1402
چکیده مقاله:
The aim of this paper is to explore the influenceof cover factor on the physical properties of woven fabrics.۱۰۰% cotton woven fabrics of different thread count andwidth were used in this research for investigation. Nine typesof fabric with different weaves like plain (۱/۱), twill (۳/۱)and ۵ ends satin (۴/۱) were used while conducting the tests.The experiments were carried out in agreement with the testmethod provided by ASTM and AATCC as mentioend insidethe paper. The cover factors of the samples were measuredwith an appropriate equation using weave factor values. Itwas seen from the research that, plain weave fabrics showedthe maximum cover factor and weight (g/m۲) values comparedto twill and satin fabrics. It was because, plain weave containsmaximum interlacement points compared to other weavestructures. The fabrics of plain weave showed the maximumstrength values, maximum air permeability values, and leastshrinkage values. Fabrics with plain weave contain moreinterlacement, thus showed the maximum air permeabilityvalues. This research is practice-based and opens up possibleways for further study by technologists in this field of fabriccover factor and its influence on the physical properties offabrics.
کلیدواژه ها:
نویسندگان
Shariful Islam
Department of Textile Engineering, Faculty of Science and Engineering, City University, Dhaka, Bangladesh.
Shilpi Akter
Department of Fabric Engineering, Faculty of Textile Engineering, Bangladesh University of Textiles, Tegjaon, Dhaka, ۱۲۰۸. Bangladesh
Shaharia Ahmed
College of Textiles, Zhongyuan University of Technology, Zhengzhou, Henan, China.