Geotechnical Evaluation of Mine Wastes for Utilization in Embarkment Construction in Jos, Central Nigeria
محل انتشار: مجله معدن و محیط زیست، دوره: 15، شماره: 2
سال انتشار: 1403
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 83
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMAE-15-2_003
تاریخ نمایه سازی: 8 بهمن 1402
چکیده مقاله:
Nigeria is abundantly blessed with solid mineral resources such as copper, gold, and tantalite, which are essential for the economic growth of the country. The extraction of these mineral resources comes with the generation of huge amount of waste. This study examines the possibility of utilizing some mine wastes from Jos, Nigeria, in embankment construction by subjecting them to relevant laboratory geotechnical experiments. The results indicates that the overburden materials contain clay-sized fraction ranging ۵-۲۰%, while the sand fraction ranged ۴۲-۸۲%, which is an indication of the predominance of sand size particles. On the other hand, the clay-sized particles in the tailings range ۵-۲۱%, while the sand fractions range ۶۵-۸۰%. The overburden materials recorded liquid limit values ranging ۲۶-۴۸% and plasticity index ranging ۶.۳-۲۱%, while the liquid limit and plasticity index of the tailings range ۲۳-۳۲.۸% and ۶.۲-۱۱.۶%, respectively. The maximum dry density (MDD) and optimum moisture content (OMC) of the overburden materials vary ۱.۸۴-۱.۹۸ mg/m۳ and ۱.۴-۱۷.۲%, respectively, with an average of ۱.۸۹ mg/cm۳ and ۱۶%. On the other hand, the tailings recorded MDD ranging ۱.۸۸-۲.۰۶ mg/m۳ with their OMC ranging ۱۴.۴-۱۶% with an average ۱۴.۸۶%. The soaked California bearing ratio (CBR) of the overburden materials range ۲۷-۳۲%, while that of tailings ranges ۲۵-۳۲%. The geotechnical evaluation of the overburden materials and tailings reveals that most of the materials are suitable for embankment construction. However, the high linear shrinkage of some wastes renders them unsuitable.
کلیدواژه ها:
نویسندگان
Ayodele Owolabi
Department of Mining Engineering, Federal University of Technology Akure, Akure, Nigeria
Sunday Daramola
Department of Applied Geology, Federal University of Technology Akure, Akure, Nigeria
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :