Fragility curves of conventional structures in Iran by using a stochastic approach
محل انتشار: دومین کنفرانس بین المللی آکوستیک و ارتعاشات
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,688
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISAV02_088
تاریخ نمایه سازی: 26 اسفند 1391
چکیده مقاله:
A lot of structures have been damaged during destructive historical earthquakes in the past. To mitigate casualties in future earthquakes, it is necessary to evaluate the current status ofthese buildings and propose effective methods to retrofit them. One method of evaluating the performance of buildings in earthquakes is through the use offragility curves. These diagrams show the probability of exceeding a specific state of damage versus seismic intensity parameters. Much work has been done on bridges, concrete and steel structures and also masonry buildingsbut stochastic processing of fragility curves as an important matter should be evaluatedbecause Seismic vulnerability analysis by means of fragility curves, obviously, needs a probabilistic approach to consider the uncertainties involved in structures and earthquakes characteristics. In this paper is focused on an analytical method for constructing fragility curves of a givenclass of existing structures, based on a stochastic approach.In stochastic analysis the problem is related to the well-known threshold crossings theory connected to the evaluation of structural reliability. In many structural problems the mostused reliability definition is the probability that system will not have a failure associated to a bilateral threshold crossing of a given level in the time interval. Thus, some frames which are most widely used in Iran are evaluated in this research. Thesemodels are analyzed under various earthquake records using the IDARC2D (ver7.0) nonlinear analysis program.To develop fragility curves, a displacement based damage index is adopted.Fragility curves are obtained in terms of probability of exceeding a given damage level by using an approximate crossings theory of stochastic processes and compare with most used probabilistic approach that system will not have a failure associated to a bilateral threshold crossing of a given level in the time interval.
کلیدواژه ها:
نویسندگان
Mohammad Hossein Ahmadi
Department of Civil Engineering, Sharif University of Technology, Tehran, Iran
Babak Ghods
Department of Civil Engineering, Sharif University of Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :