Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology
محل انتشار: مجله مکانیک کاربردی محاسباتی، دوره: 54، شماره: 4
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 125
فایل این مقاله در 19 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCAM-54-4_005
تاریخ نمایه سازی: 11 دی 1402
چکیده مقاله:
Due to the alarming increase in greenhouse gases, switching to clean, renewable energy sources like wind energy has become imperative. As a result, the use of different wind turbines to generate electricity increased worldwide. Meanwhile, Darrieus vertical axis wind turbines (VAWTs) have gained considerable popularity due to their acceptable efficiency. Individual wind turbines are not efficient enough for widespread use and are only suitable for providing domestic energy; therefore, they should be placed in the form of turbine clusters in wind farms. The wind farm configuration and cluster placement have specific considerations, including the rotors' optimal installation distance and rotational direction. In the present study, the rotors installation distance in an array including a cluster of three Darrieus rotors is investigated, and the CFD and Kriging optimization results ensured that the best installation distance is equal to ۱.۵ times the diameter (۱.۵D). Also, the CFD results for the rotor's rotational direction at the installation distance of ۱.۵D showed that when the lower downstream rotor is counter-rotating the leading rotor and clockwise, the overall efficiency of the cluster increases by ۶۷.۱%. Additionally, two V-shaped and rhombic configurations are modeled, and the overall efficiency of each turbine in two different configurations is compared separately with the single turbine. In the optimum case, the overall efficiency of turbine A in the V-shaped configuration of three turbines and the rhombic configuration of ۱۲ turbines improved by ۵۴% and ۳۶%, respectively, compared to the single turbine. The study of the streamlines showed that the main reason for improving the performance in the V-shaped configuration is the favorable velocity gradient around the blade, and the decrease in overall efficiency in the V-shaped and rhomboid configurations is wake flow intensity and trapping between the rotors which cause the stagnation zone.
کلیدواژه ها:
نویسندگان
Farzad Ghafoorian
Turbomachinery Research Laboratory, Department of Energy Conversion, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
Seyed Reza Mirmotahari
Hydrogen and fuel cell laboratory, Faculty of New Sciences and Technologies, University of Tehran, Tehran, Iran
Farnaz Bakhtiari
Hydrogen and fuel cell laboratory, Faculty of New Sciences and Technologies, University of Tehran, Tehran, Iran
Mehdi Mehrpooya
Renewable Energies and Environment Department, Faculty of New Sciences and Technologies, University of Tehran, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :