Loading Path Determination for Tube Hydroforming Process of Automotive Component Using APDL
محل انتشار: مجله علم مهندسی خودرو، دوره: 3، شماره: 4
سال انتشار: 1392
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 40
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJAEIU-3-4_002
تاریخ نمایه سازی: 5 دی 1402
چکیده مقاله:
In this study, an extended stress-based forming limit diagram (FLD) for prediction of necking based on the
Marciniak and Kucznski (M-K) model is represented and applied in tube hydroforming. The bulge forming
of a straight tube is simulated by finite element method and verified with published experimental data. This
adaptive simulation technique is based on the ability to detect the onset and growth of defects (e.g., bursting
and wrinkling) and to promptly readjust the loading paths. Thus, a suitable load path is determined by
applying Adaptive Simulation Method in ANSYS Parametric Design Language (APDL).
کلیدواژه ها:
نویسندگان