Comparison the Sensitivity Analysis and Conjugate Gradient algorithms for Optimization of Opening and Closing Angles of Valves to Reduce Fuel Consumption in XU۷/L۳ Engine

In this study it has been tried, to compare results and convergence rate of sensitivity analysis and conjugate gradient algorithms to reduce fuel consumption and increasing engine performance by optimizing the timing of opening and closing valves in XU۷/L۳ engine. In this study, considering the strength and accuracy of simulation GT-POWER software in researches on the internal combustion engine, this software has been used. In this paper initially all components of engine have been modeled in GT-POWER. Then considering the experimental result, results confirmed the accuracy of the model. After model verification, GT-POWER model with MATLAB-SIMULINK are coupled each other, to control the inputs and the outputs by sensitivity analysis and conjugate gradient algorithms. Then the results compared with experimental results of initial engine too. The results indicated that optimal valve timing significantly reduced brake specific fuel consumption and when is used variable valve system for opening and closing angle of intake and exhaust valves, the mean improvement percentage in brake specific fuel consumption from sensitivity analysis is nearly ۵.۸۷ and from conjugate gradient is about ۶.۶۹. too, for example with increasing engine speed late closing intake valve causes optimized brake specific fuel consumption and from ۳۵۰۰rpm this trend stops and in ۴۰۰۰rpm and ۴۵۰۰rpm early closing of intake valve results in more optimized brake specific fuel consumption. Then up to ۶۰۰۰rpm again late closing of valve would be favorable. Also results indicated that convergence rate of conjugate gradient algorithm to reaching the optimal point is more than sensitivity analysis algorithm.

کلیدواژه ها:

Sensitivity analysis ، Conjugate Gradient ، GT-POWER ، MATLAB -SIMULINK ، valves timing.