Numerical Modeling to Assist in Hydraulic Design of the Dharla Barrage and Ancillary Works

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 964

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IREC09_114

تاریخ نمایه سازی: 19 اسفند 1391

چکیده مقاله:

A barrage across the Dharla River in Bangladesh is envisaged as the main structural intervention needed for surface water irrigation development. Two-dimensional numerical modelling has been successfully applied to assist in hydraulic design of the barrage and ancillary works. A model covering a river stretch of about 36km has been developed. The model setup consists of curvilinear computational grid, open and closed boundaries and initial bathymetry based on bathymetric survey data. After calibration and validation the developed model has been applied for selection of appropriate layout of head and tail cut, barrage and river training works. Hydraulic design of the barrage and ancillary works has also been assessed by use of the model. This paper presents the results of the assessment in relevant terms.

نویسندگان

Pintu Kanungoe

Principal Scientific Officer, River Research Institute, Faridpur, Bangladesh

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • River Research Institute. (2010). _ _ Two -dimensional Modelling for ...
  • DHI Water and Environment. (2007). "MIKE21C River Hydro dynamics and ...
  • نمایش کامل مراجع