State of art in block ramp and downstream stilling basin design

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,128

فایل این مقاله در 18 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IREC09_001

تاریخ نمایه سازی: 19 اسفند 1391

چکیده مقاله:

Block ramps are hydraulic structures which are commonly used in river restorationprojects. Especially in the last few decades, the use of this type of structures havebecome more and more popular. They furnish a correct balance between thehydraulic functioning and the environmental care, as they minimize the impact onthe environment in which they are located. In addition, they can be consideredflexible structures, i.e. they can easily adapt to the in situ conditions and they canbe easily built to re-convert traditional concrete structures. They can be built eitherby loose or fixed blocks, arranged on a sloped bed. However, a correct design ofthis structural typology has to take into consideration several aspects. In particular,the hydraulic functioning of a block ramp is assured when the structure remainsstable, i.e. when the blocks are not removed from their original position. Thus, thefirst step in designing block ramps has to be the structural stability. Furthermore,the analysis has to focus also on the dissipative process occurring on them, inparticular it has to consider the different flow regimes that can take place and theeffect of the bed roughness on the energy dissipation. Another important aspect isthe stilling basin design. In fact, a block ramp has not to be considered as anisolated element in the contest in which it is located. It is part of that contest and itcontributes to modify it. Thus, it is extremely important to consider the scourprocess occurring downstream of the structure. In particular, the maximum scourdepth and length have to be carefully estimated in order to avoid structural collapseof the ramp. The scour process occurring downstream of the structure is alsoextremely important in terms of energy dissipation. In fact, the global dissipativeprocess is the result of two distinct processes: one occurring on the ramp and theother in the downstream stilling basin. Finally, the analysis has to take intoconsideration which are the global sediment transport conditions of the river inwhich the structure is located. Thus, it has to be conducted in both clear water andlive-bed conditions. It appears evident that a correct design of this type ofstructures is a complex operation which requires a particular attention in order toavoid functioning problems.

نویسندگان

Stefano Pagliara

DESTEC –Department of Energy Engineering, Systems,Land and Construction – University of Pisa – Pisa – Italy

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Armanini, A. and Gregoretti, C. (2005). "Incipient sediment motion at ...
  • Bathurst, J.C. (1978). _ resistance of large-scale roughness.: Journal of ...
  • Bathurst, J.C., Simons, D.B. and Li, R.M. (1981). ":Resistance equation ...
  • Breusers, H.N.C. and Raudkivi, A.J. (1991). "IAHR Hydraulic structures design ...
  • Bormann, E. and Julien, P.Y. (1991). "Scour downstream of grade ...
  • Canepa, S. and Hager, W.H. (2003). "Effect of air jet ...
  • Chamani, M.R., and Rajaratnam, N. (1999a). "Characteristc S of skimming ...
  • Chamani, M.R. and Rajaratnam, N. (1999b). "Onset of skimming flow ...
  • Chanson, H. (1994). "Hydraulic design of stepped cascades, channels, weirs ...
  • Christodoulou, G.C. (1993). "Energy dissipation on stepped spillways.: Journal of ...
  • D Agostino, V. and Ferro, V. (2004). "Scour on alluvional ...
  • Dey, S. and Sarkar, A (2006). "Scour downstream of an ...
  • Diez-Cascon, J., Blanco, J.L., Revilla, J. and Garcia, R. (1991). ...
  • Farhoudi, J., and Smith, K.V.H. (1985). "Local scour profile downstream ...
  • Ferro, V., Dalla Fontana, G., Pagliara, S., Pugliesi, S. and ...
  • Hassan, N.M.K.N. and Narayanan, R. (1985). "Local ScOur downstream of ...
  • Hoffmans, G.J.C.M. and Verheij, H.J. (1997). "Scour manual." Balkema, Rotterdam, ...
  • Hoffmans, G.J.C.M (1998) "Jet scour in equilibrium phase.:" Journal of ...
  • Pagliara, S. and Chiavaccini, P. (2003). "The use of piles ...
  • Pagliara, S. and Chiavaccini, P. (2004). "Stability of reinforced block ...
  • Pagliara, S. and Chiavaccini, P. (2006a). "Energy dissipation On block ...
  • Pagliara, S. and Chiavaccini, P. (2006b). "Energy dissipation On reinforced ...
  • Pagliara, S. and Chiavaccini, P. (2007). "Failure mechanisms of base ...
  • Pagliara, S. (2007). "Influence of sediment gradation On _ downstream ...
  • Pagliara, S. and Palermo M. (2008a). "Scour control downstream of ...
  • Pagliara, S. and Palermo, M. (2008b). "Scour control and surface ...
  • Pagliara, S., Das, R. and Palermo, M. (2008). "Energy dissipation ...
  • Pagliara S., Palermo, M. and Carnacina, I. (2009a). :Scour and ...
  • Pagliara, S., Palermo, M. and Lotti, I. (2009b). "Sediment transport ...
  • Pagliara, S. and Palermo, M. (2010). "Influence of tailwater depth ...
  • Pagliara S. and Palermo, M. (2011a). :Effect of stilling basin ...
  • Pagliara, S. and Palermo, M. (2011b). "Block ramp failure mechanisms: ...
  • Pagliara, S., Palermo, M. and Carnacina, I. (2011). "Expanding pools ...
  • Pagliara, S. and Palermo, M. (2012). "Effect of stilling basin ...
  • Pagliara, S., Palermo, M. _ Carnacina, I. (2012). "Live-bed _ ...
  • Pagliara, S. and Palermo, M. (2013). "Rock grade control structures ...
  • Robinson, K.M., Rice, C.E. and Kadavy, K.C. (1997). "Design of ...
  • Stephenson, D. (1991). "Energy dissipation down stepped spillways." Int. Water ...
  • Sumer, B.M., Christiansen, N. and Fredse, J. (1993). "Influence of ...
  • نمایش کامل مراجع