Effect of Changes in the Parameters of a Modular Converter in Its Controllability Range in Fuel Cell Applications
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 57
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAREE-2-1_007
تاریخ نمایه سازی: 3 دی 1402
چکیده مقاله:
In fuel cell systems, voltage balancing is an important consideration. The utilization of a modular construction based on a three-level boost converter was able to balance DC voltage. This paper investigates the effect of parameter variations, such as inductors and capacitors, on the converter's steady-state controllable areas. The plot of the inductor current and the voltages of the output capacitors are illustrated for different scenarios. The system simulation results were performed using MATLAB / Simulink software.
کلیدواژه ها:
نویسندگان
Mohammad Afkar
Mechanical and Energy Engineering, Department of Renewable Energy, Shahid Beheshti University, Tehran ۱۶۵۸۹-۵۳۵۷۱, Iran
Parham Karimi
Mechanical and Energy Engineering, Department of Renewable Energy, Shahid Beheshti University, Tehran ۱۶۵۸۹-۵۳۵۷۱, Iran
Roghayeh Gavagsaz-Ghoachani
Mechanical and Energy Engineering, Department of Renewable Energy, Shahid Beheshti University, Tehran ۱۶۵۸۹-۵۳۵۷۱, Iran
Matheepot Phattanasak
Department of Teacher Training in Electrical Engineering, King Mongkut&#۰۳۹;s University of Technology North Bangkok, Bangkok ۱۰۸۰۰, Thailand
Serge Pierfederici
LEMTA Université de Lorraine, CNRS Nancy, France
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :