Laboratory Study of the Application of a Novel Bio-Based Polymer to Synthesize Aphron Drilling Fluids
محل انتشار: مجله علوم و فن آوری نفت، دوره: 12، شماره: 2
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 129
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JPSTR-12-2_005
تاریخ نمایه سازی: 30 آذر 1402
چکیده مقاله:
Aphron fluids are a special type of foam in which the gas bubble (air or any other gas) is surrounded by a double-walled layer consisting of surfactant and polymer. Therefore, it is more stable at high temperature and pressure conditions due to being preserved by three layers. These fluids are widely used in industry. Today, the industry uses various polymers such as acrylamides, polyacrylamides, and hydrolyzed acrylamides that are harmful to the environment. In this study, the possibility of using natural and biodegradable polymers such as Astragalus Gum and starch is investigated. The results showed that the Aphron fluid made from Astragalus Gum (extracted from a dessert plant) had a higher volumetric yield than industrial polymers. Stability over time and rheological properties for Astragalus Gum are also acceptable. Also, it is found that increasing the polymer concentration increases the stability and rheological properties, but in contrast, the volumetric yield decreases. The effect of salt and surfactant concentrations is also evaluated in this research. The results show that increasing the surfactant concentration increases the volumetric yield of the fluid. Increasing the surfactant concentration from ۱ wt% to ۲ wt% increases the volumetric efficiency of Aphron fluids by ۵%. In general, according to the results obtained in this research work, Astragalus Gum’s performance is better than synthetic polymers for making Aphron fluids.
کلیدواژه ها:
نویسندگان
Omid Sharifi
Department of Petroleum Engineering, Islamic Azad University of Omidieh Branch, Omidieh, Iran
Saeed Parvizi
Department of Petroleum and Natural Gas Engineering, Sahand University of Technology, Tabriz, Iran
Saeed Khezerloo
Department of Petroleum Engineering, Amirkabir University of Technology, Tehran, Iran
Samaneh Ghorbanpour
Department of Petroleum Engineering, Islamic Azad University of Mahshahr Branch, Mahshahr, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :