A Pilot Study of Syngas Production from Bio-oil Thermal Cracking in a Bubbling Fluidized Bed Reactor
محل انتشار: مجله علوم و فن آوری نفت، دوره: 9، شماره: 1
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 44
فایل این مقاله در 17 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JPSTR-9-1_005
تاریخ نمایه سازی: 29 آذر 1402
چکیده مقاله:
A fluidized bed reactor that is operating in the bubbling regime has been developed for the conversion of bio-oils to syngas.The reactor consists of a ۷.۶ cm I.D. (or internal diameter) bed, with an expanded freeboard. The volume of the reactor can be adjusted to vary the gas residence time. This reactor has been used to carry out either thermal or catalytic cracking for reforming bio-oils.A gas-atomized injector has been specially developed to feed a bio-oil, which may be viscous and contaminated with small ash and char particles. Besides, the gas-atomized nozzle allows it to remain cool until coming in contact with the fluidized particles inside the bed.This article presents the product yields and compositions obtained by thermally cracking the bio-oil at various temperatures and gas residence times. The bed temperature was varied from ۵۰۰ to ۷۰۰ °C. Moreover, the vapor residence time ranged from ۷.۸ to ۲۷.۶ seconds.Also, the effect of particle size and mass of bed was investigated. Finally, based on this study, the conversion of bio-oil to gas increased with an increase in temperature and residence time.
کلیدواژه ها:
نویسندگان
Mohammad Latifi
Process Engineering Advanced Research Lab (PEARL), Chemical Engineering Department, Ecole Polytechnique de Montréal, Montréal, Quebec, Canada
Lorenzo Ferrante
DuPont Canada, Kingston, Ontario, Canada
Cedric Briens
Institute for Chemicals and Fuels from Alternative resources (ICFAR), Chemical and Biochemical Engineering Department, Western University, London, Ontario, Canada
Franco Berruti
Institute for Chemicals and Fuels from Alternative resources (ICFAR), Chemical and Biochemical Engineering Department, Western University, London, Ontario, Canada
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :