UTILIZING CONCEPTUAL MODELING IN THE STUDY OF ONE OF THE IRANIAN FRACTURED CARBONATE RESERVOIRS

سال انتشار: 1392
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 82

فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JPSTR-3-2_008

تاریخ نمایه سازی: 29 آذر 1402

چکیده مقاله:

A typical Iranian carbonate matrix block surrounded by an open fracture was modeled in order to understand the fracture-matrix interaction and realize how to model the interaction best. The modeling was carried out by using a fine-scaled Eclipse model in the single porosity mode (the fractures were explicitly modeled). The model was extended to a stack of ۶ matrix blocks to understand block-to-block interaction under both water and gas injection scenarios. The results and conclusions obtained from the single porosity single block and ۶-block model were used in order to optimize the full field model. The simulation results showed that gas injection worked as a major recovery mechanism for medium and good rock types at all block heights and for poor rock type with block heights of more than ۲ meters. The oil recovery results were in the same range for the single and six-stack block model, but the delay of oil recovery by gas gravity drainage is clearly seen in the six-stack block results indicating a period of at least ۸-۱۰ years required for reaching ultimate oil recovery for typical block heights. The water injection simulations showed that water imbibes drained the matrix block in a short time dependent on water front advancement in the fracture system surrounding the block. From the simulation results, it was concluded that the water imbibition process was a fast recovery mechanism for all block heights dependent on injection rate and fracture volume which had to be flooded to achieve full recovery of the block. The expected recovery factor of drained oil to initial oil in place after water injection was in the range of ۱۵-۳۵ % for poor to good rock types and different block sizes in the range of ۱-۵ meters. The results were highly influenced by wettability conditions in the reservoir

کلیدواژه ها:

Iranian Fractured Carbonate Reservoir ، Conceptual Modeling ، Water Injection ، Gas Injection ، Drainage and Imbibitions

نویسندگان

seyed Majid Hashemi

Institute of Enhanced oil Recovery, NIOC

Gholamreza Bashiri

Institute of Enhanced oil Recovery, NIOC

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • REFERENCES[۱] Kazemi, H. et al., “Numerical Simulation of Water-oil Flow ...
  • Saidi, A. M., “Mathematical Simulation Model Describing Iranian Fractured Reser- ...
  • Yamamoto, Roy H., “Compositional Reservoir Simulator for Fissured System: The ...
  • Fung, S. K., “Simulation of Block to Block Processes in ...
  • Kossak, H., “Realistic Numerical Models for Fractured Reservoirs,” SPERE, February, ...
  • Saidi, A. M., Tehrani, D. H, and Wit, K., “Mathematical ...
  • Vidal, J, Aquitaine, E, “Gas/Oil Gravity Drainage: Laboratory Study of ...
  • Eclipse Technical and User Manuals, ۲۰۱۰ ...
  • نمایش کامل مراجع