New Mind Development Makes Issues in Home Fabrication of ۳D Printing
محل انتشار: دوفصلنامه تفکر طراحی، دوره: 2، شماره: 2
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 62
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JJDT-2-2_013
تاریخ نمایه سازی: 6 آذر 1402
چکیده مقاله:
Despite the existence of a multiplicity of changeable and erratic desires for product design, ۳D printer makers often mull about maintaining their market-leading positions. As the household ۳D printer market segment has boomed over the recent years, an interesting question arises here whether it is really a good idea to have home fabrication on the basis of a theory that ‘satisfaction’ through the visual form printed by the ۳D printer cannot remain the same forever, and lead the prosumers to change the last printed form by frequently printing another design to overcome the satisfaction. This immediately dismisses the last printed form creating a lot of waste/scrap. Here, we have arrived at the hypothesis that ‘it is not possible to obtain waste/pollution requirements in the future by sending a ۳D printer to every house without having a proper solution’. In order to understand this phenomenon, first of all, the research paper tries to prove it through literature review; then mathematical argument supports the findings. In the end, all these arrive at a recommendation. To meet the requirements of a sustainable society in the future we need re-manufacturing which is just operated by prosumer.
کلیدواژه ها:
نویسندگان
Mohsen Jaafarnia
School of Design, Hunan University, Changsha, China.
Sahar Boroomand
School of Art and Architecture, Central South University, Changsha, China.
Mohsen Saffar Dezfuli
School Of Architecture and Environmental Design, Iran University of Science & Technology, Tehran, Iran
Seyed Hashem Mosaddad
School Of Architecture and Environmental Design, Iran University of Science & Technology, Tehran, Iran
Avinash Shende
Industrial Design Centre, Indian Institute of technology Bombay, India.
Arash Hekmat
School of Art and Architecture, Central South University, Changsha, China.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :