Fabrication of Ni-Cu with Hierarchical Structure on Cu substrate via Electrodeposition Method and Investigation the Microstructure and Corrosion Resistance
محل انتشار: مجله علوم و مهندسی خوردگی، دوره: 11، شماره: 42
سال انتشار: 1400
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 120
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ICAC-11-42_005
تاریخ نمایه سازی: 5 آذر 1402
چکیده مقاله:
The study of superfluid levels due to the importance of these levels in many applications has been considered. In
this study, nickel-copper alloy coatings were created using a two-step electrochemical deposition method-the
surface energy reduction and microstructure and corrosion resistance were investigated. Surface morphology was
investigated using scanning electron microscopy and XRD for field publishing and fuzzy structure. Corrosion
resistance was investigated using potentiodynamic polarization method as well as electrochemical impedance
spectroscopy. The results of this study showed that by increasing the concentration of Modidium crystal in the
coating bath, the nanostructured coating was obtained and at a concentration of ۲۰۰ grams per liter, a hieratic
hierarchy coating was obtained. XRD data showed that only the nickel phase was created and a solid solution was
created by the entry of copper atoms into the structure. Corrosion behavior studies showed that with the formation
of coating, the corrosion density decreased from ۶.۲ to ۰.۱۲ mA/cm۲, and corrosion potential from-۲۷۳ to -۱۷۱
also decreased. The reason for this was the capture of trapped air in the coating, thereby preventing the entry of
corrosive ions into the substrate as well as the Laplace pressure.
کلیدواژه ها:
Ni-Cu coatings ، microstructure ، corrosion resistance ، electrochemical impedance spectroscopy ، پوشش نیکل - مس ، ریزساختار ، مقاومت به خوردگی ، طیف سنجی امپدانس الکتروشیمیایی