Investigation the Anti-Corrosion and Adhesion Properties of Novel MultiCationic Conversion Coating Applied on Steel Substrate
محل انتشار: مجله علوم و مهندسی خوردگی، دوره: 8، شماره: 30
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 84
فایل این مقاله در 16 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ICAC-8-30_005
تاریخ نمایه سازی: 5 آذر 1402
چکیده مقاله:
Conversion Coatings are one of the effective ways for improving adhesion of organic coatings to metallic substrates and consequently increasing anti-corrosion performance of a fully coated system. In the current research, multi-cationic conversion coating formed from sources such as hexafluorotitanic acid, sodium molybdate, phytic acid and nickel sulphate was studied and investigated. Results obtained from electrochemical impedance spectroscopy and polarization revealed that conversion coating which formed in the presence of sodium molybdate has not appropriate polarization resistance and the reason for this weak performance investigated by field emission scanning electron microscope. Obtained results showed that in the presence of sodium molybdate, there were abundant micro-cracks on the surface of the coating. After optimizing the multicationic conversion coating, an epoxy coating applied on the surface of bare steel and conversion coated one. The results obtained from adhesion and salt-spray tests indicated that the multi-cationic conversion coating causes improvement in adhesion strength of epoxy coating to steel substrate and finally increased the anti-corrosion performance of the system
کلیدواژه ها:
Conversion coating ، Adhesion ، Corrosion ، Impedance ، Polarization ، FE-SEM ، پوشش تبدیلی ، چسبندگی ، خوردگی ، امپدانس ، پلاریزاسیون ، FE-SEM