An Integrative Approach Using Axial Fins, Numerical Assessment, and Experimental Data Analysis in Helical Heat Exchangers
محل انتشار: بیستمین کنفرانس دینامیک شاره ها
سال انتشار: 1402
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 87
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CFD20_115
تاریخ نمایه سازی: 29 آبان 1402
چکیده مقاله:
In this study, heat transfer and fluid flow in a helical heat exchanger with double, triple, and quadruple axial fins were numerically evaluated. The impact of different fin heights and thicknesses on heat transfer within the proposed heat exchanger was also investigated. The thermal conductivity and dynamic viscosity of fluids were experimentally measured and applied to the simulations. Furthermore, the effects of using SiO۲, MWCNT, and a hybrid nanofluid were experimentally assessed. It was observed that the Nusselt number was improved by ۴.۹۷% with the quadruple fins compared to the triple fins model. Additionally, a substantial ۹۶.۷۶% enhancement in the Nusselt number was achieved between the ۲mm fin height model and the base model at a Reynolds number of ۳۰,۰۰۰, due to an increase in fin height and thickness. Moreover, the utilization of a hybrid nanofluid resulted in a ۱۲.۷۶% increase in the average Nusselt number at a Reynolds number of ۳۰,۰۰۰. The research used ANSYS FLUENT, a commercial computational fluid dynamics software employing the finite volume method.
کلیدواژه ها:
نویسندگان
Mohammad Zaboli
Department of Mechanical Engineering, Semnan University, Semnan, Iran
Mohammad Hassan Pahlavanian
Department of Mechanical Engineering, Semnan University, Semnan, Iran
Seyfolah Daedodin
Department of Mechanical Engineering, Semnan University, Semnan, Iran