STUDY ON HARDNESS AND TENSILE PROPERTIES OF A356/NANO- 2 3 Al O COMPOSITES FABRICATED BY A NOVEL APPROACH FOCOUSING ON PARTICLE DISTRIBUTION IN MATRIX

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,306

فایل این مقاله در 18 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IMES06_189

تاریخ نمایه سازی: 8 بهمن 1391

چکیده مقاله:

In this research, aluminum alloy (A356) matrix composites, reinforced with 1.5 vol. % nano-2 3 Al O , were fabricated via stir casting method. To avoid agglomeration and segregation of nano- 2 3 Al O particles in molten aluminum, nano- 2 3 Al O particles were milled with aluminum and copper powders separately and incorporated into aluminum alloy as reinforcements. The effect of adding different mixed powders on mechanical properties of composites was investigated by hardness and tensile tests. Based on the results, the composites, reinforced with various mixed powders, showed different mechanicalproperties. These variations can be related to the influence of different metallic particles on uniform distribution of nano particles, grain refinement of aluminum matrix, and porosity content of different composites

نویسندگان

Mohammad Karbalaei Akbari

Department of Materials Science and Engineering, Semnan University, Semnan, Iran

Hamid Reza Baharvandi

Department of Materials Science and Engineering, MUT, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • A356/1.5 vol. %Al2O3 :ل-ها _ ...
  • _ d:A356/1.5 vol.% AI2O3 sing Cu Particle(850 C) لا ...
  • Sajadi, S.A., Torabi Parizi, M. _ Ezatpour, H.R. and Sedghi, ...
  • Razavi-Tousi, S.S., Yazdani-Rad, R., and Manafi, S.A., Effect of volume ...
  • Kang, Y.C., and Chan, S.L.., Tensile Properties of nanometric Al, ...
  • RazaviHesabi, Z., Hafizpour, H.R., and Simchi, A., An investigation on ...
  • Mazahery, A., Abdizadeh, H., and Baharvandi, H.R., , Development of ...
  • Bouvard, D., Densification behaviour of mixtures ofhard and soft powders ...
  • Leon, C.A., M endeza-Suarez, G., and Drew R.A.L, Wettability and ...
  • Sokolowski, J.H., Sun, X.C, Byczynski, G., Northwood, D.O., Penrod, D.E., ...
  • Sjolander, E., and Seifeddine, S., The heat treatment of Al-Si-Cu-Mg ...
  • Geiger, A.L., and Walker, J.A., The Processing and Properties of ...
  • A356/1.5 vol. % Al2O3 Using Al Particle A356/1.5 vol. % ...
  • A356/1.5 vol. % Al2O3 Using Cu Particle (850 C) ...
  • A356/1.5 vol. % Al2O3 (850 C) ...
  • A356/1.5 vol. % Al2O3 Using Al Particle (850 C) A356/1.5 ...
  • _ _ A356/1.5 vol. %Al23 _ Particles ...
  • A356/1.5 vol. %Al2O3 :c-ه _ Particle ...
  • نمایش کامل مراجع