Modeling and Evaluating of Densification and Impact Energy during Supersolidus Liquid Phase Sintering of Brass Alloyed Powder
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,250
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES06_178
تاریخ نمایه سازی: 8 بهمن 1391
چکیده مقاله:
An experimental investigation using response surface methodology (RSM) based on a central composite rotational design (CCRD) with three parameters, was used to model and evaluate the supersolidus liquid phase sintering (SLPS) procedure of the brass alloyed powder. To achieve a high densification, the effect of sintering variables such as sintering temperature and time has to be characterized and optimized. Mathematical models were developed to predict sintered density, porosity, and impact energy at 95% confidence level. The developed mathematical models would help to predict the variation of densificationat the various mentioned sintering conditions. To better analyzing the microstructure and pore evaluation was carried out from metallographic cross-section of samples to evaluate sintering variables during supersolidus liquid phase sintering.
کلیدواژه ها:
نویسندگان
A. Mohammadzadeh
Department of Materials Engineering, Sahand University of Technology, P.O. Box ۵۱۳۳۵-۱۹۹۶, Tabriz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :